Welcome To ZL DIAMOND TECHNOLOGY CO.,LTD.
-
+86-18030177538
-
Mon - Fri, 09AM to 18PM
Diamond Cutting Saw For Stone Concrete Glass
Specification：2.2mm 3.4mm 4.0mm 5.0mm
Application:granite, marble, glass, crystal
Details
Diamond Cutting Saw For Stone Concrete Glass
| Products | Application | Diameter(mm) | Fixed method |
| Vacuum brazed wrie saw | For marble, limestone, travertine quarry | 11.0 | spring |
| For marble, limestone, travertine block squaring | 11.0 | spring | |
| Diamond wire saw for granite, Sintered | For quarry | 11.5 | rubber |
| For squarring | 11.0 | plastic | |
| For profiling | 8.8 | plastic | |
| Diamond wire saw for marble, Sintered | For quarry | 11.0 | spring |
| For squarrying | 11.0 | plastic | |
| For profiling | 8.8 | plastic |
Attention:
1. The steel cable tension of the stationary machines should be controlled within 250-300kg(φ4-5mm)
2. Linear speed is ajusted according to stones hardness.
3. For the new wire, when start to cut, its linear speed should be slower 2-3m/s than the standard mentioned above, it is good for sharpen.
